Projektlabor Robotik MINTgrün

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
====Code-Beispiele aus den Vorlesungsvideos SoSe2020=====

===Woche 2: Rekapitulation Woche 1 und Start in die Woche 2===
<hidden Strings>
<code java>
int counter = 1; // counts how many times draw() has run
void setup() {
}

void draw() {
  String word1 = "Hallo";
  String word2 = "Person";
  System.out.println(word1 + " " + word2 + " " + counter); // alternative to println()
  counter++;
}
</code>
</hidden>

<hidden Konstanten>
<code java>
int pos = 0; // coordinates of the circle center
final int SIZE_CIRCLE = 100; // circle diameter

void setup() {
  size(600, 400);
}

void draw() {
  background(200);
  circle(pos, pos, SIZE_CIRCLE);
  pos++;
}
</code>
</hidden>
\\

===Woche 2: Arrays===
<hidden Code>
<code java>
int punkteStud1 = 11;
int punkteStud2 = 9;
int punkteStud3 = 8;
int punkteStud4 = 12;
//...

//Arrays anlegen
//Variante 1
int[] punkteStudVar1 = new int[4];
punkteStudVar1[0] = 11;
punkteStudVar1[1] = 9;
punkteStudVar1[2] = 8;
punkteStudVar1[3] = 12;

//Variante 2
int[] punkteStudVar2 = {11,9,8,12};

//Werte ändern und auslesen
punkteStudVar2[2] = 10;

punkteStudVar1[2] = punkteStudVar2[2];

//Länge von Arrays
//!Wichtig! Arrays fangen bei 0 an
int arrayLange = punkteStudVar2.length;
println(arrayLaenge);

//Zweidimensionale Arrays
int[][] StudentenHA = new int[4][2];
StudentenHA[0][0] = 11;
StudentenHA[1][0] = 9;
StudentenHA[2][0] = 8;
StudentenHA[3][0] = 12;

StudentenHA[0][1] = 8;
StudentenHA[1][1] = 13;
StudentenHA[2][1] = 15;
StudentenHA[3][1] = 9;</code>
</hidden>

\\
===Woche 2: Schleifen===
<hidden while und for>
<code java>
void setup(){
  
  int x=0;
  int y=-10;
  while (x>y){
    y++;
    print (y+", ");
  }

  println();


  for (int i = 0; i<20; i++){
    print (i +", ");
  }

}

void draw(){
}
</code>
</hidden>

<hidden Beispiel mit Arrays>
<code java>
int[] intArray0 = {0,1,2,3,4,5,6,7,8,9}; //Deklaration und initialisierung von intArray0, alle Werte sind fest.

int[] intArray2 = new int[10];//Deklaration und initialisierung von intArray2

void setup(){
 
  
  intArray2[9] = 23;
  
  println("Länge von intArray0: "+intArray0.length);
  println("Länge von intArray2: "+intArray2.length);





  print("intArray0:["); // Gebe "intArray0:[" aus (ohne Zeilenumbruch)
  
  int counter = 0; // Lege Variable counter zum durchgehen des Arrays-0 an

  while (counter < intArray0.length){ //Solange counter kleiner ist als die Arraylänge tue:
    
    print(intArray0[counter]+", "); //Gebe den Arrayeintrag an der Stelle "counter" aus.
    counter++; //Erhoehe counter um 1.
  }
  
  println("]");
  
  
  print("intArray2:[");
  for ( int i = 0; i < intArray2.length; i++){
    print(intArray2[i]+", ");
  }
  println("]");
  
  
}


void  draw(){
}
</code>
</hidden>

<hidden Beispiel mit zweidimensionalen Arrays>
<code java>
int[][] intArray0 = {{0,1,2,3,4,5,6,7,8,9,10},{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9},
{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9},
{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9},{0,1,2,3,4,5,6,7,8,9}}; 
//Deklaration und initialisierung von intArray0

int[][] intArray2 = new int[10][10];//Deklaration und initialisierung von intArray2

void setup(){
 
   //setze einige werte
  intArray2[9][2] = 92;  
  intArray2[9][9] = 99;
  intArray2[1][1] = 11;
  
  //gebe längen der arrays aus 
  println("Länge von intArray0: "+intArray0.length);
  println("Länge von intArray2: "+intArray2.length);
  println();
  println();

   
  /*Gebe das gesamte 2D Array intArray0 aus.*/
   
  int zeile = 0; // Lege Variable counter zum durchgehen des Arrays-0 an
  while (zeile < intArray0.length){ //Solange counter kleiner ist als die Arraylänge tue:
    
    int spalte= 0;
    while (spalte< intArray0[zeile].length){
       print(intArray0[zeile][spalte] + " "); //Gebe den Arrayeintrag an der stelle [zeile][spalte] aus.
       spalte++; //Erhoehe spalte um 1.
    }
    
    println();
    zeile++; //Erhoehe zeile um 1.
  }
  
  
  //Zeilenumbrüche für die übersichtlichkeit
  println();
  println();
  
  
  
  /*Gebe das gesamte 2D Array intArray2 aus.*/
  
  for ( int z = 0; z < intArray2.length; z++){ // z gibt die zeile an.
    
    for (int s = 0; s <intArray2[z].length; s++){ //s gibt die Spalte an.
      print(intArray2[z][s] + "\t"); // Gebe den Eintrag [z][s] aus.
    }
    
    println();
  }
  
  
}


void  draw(){
  
}
</code>
</hidden>
\\
===Woche 2: Methoden====

<hidden Beispeiele von Methoden>
<code java>
void setup() {
  boolean result = isEven(10);
}

void draw() {
  int[] pointerCoords= getCoords();
  println(pointerCoords[0] + " " + pointerCoords[1]);
}

// Returns the x and y of the mouse 
int[] getCoords() {
  int[] coords = {mouseX, mouseY};
  return coords;
}

// Determines if the given number if even. Returns true if even, false otherwise.
boolean isEven(int number) {
  if (number%2==0) {
    return true;
  } else {
    return false;
  }
}

// Returns true if the first number in array if greater than the second number, false otherwise. The array should have the length = 2 
boolean isGreater(int[] numbers) {
  if (numbers[0] > numbers[1]) {
    return true;
  } else {
    return false;
  }
}

// Calculates the sum of two numbers
int sumNumbers(int number1, int number2) {
  int result = number1 + number2;
  return result;
}

// Prints a greeting according to the person's index
void greet(int index) {
  println("Hallo Person " + index);
}

// Prints a greeting
void greet() {
  println("Hallo Welt");
}
</code>
</hidden>
\\

===Woche 3: Steuerung eines zweirädigen Roboters===

<hidden Über globale Variablen>
<code java>
float posX = 300; // x coordinate of the circle center
float posY = 200; // y coordinate of the circle center
float angle = PI/4; // current direction of the robot
final int RADIUS = 50; // radius of the robot


void setup() {
  size(600, 400);
}

void draw() {
  background(200);
  show();
  move(4);
  turn(0.05);
}

// Turns the robot by the given angle value
void turn(float angleDiff) {
  angle = angle + angleDiff;
}

// Moves the robot forward by the given distance
void move(float distance) {
  posX = posX + distance * cos(angle);
  posY = posY + distance * sin(angle);
}

// Draws the robot
void show() {
  circle(posX, posY, RADIUS*2); 
  line(posX, posY, posX + RADIUS * cos(angle), posY + RADIUS * sin(angle));
}


</code>
</hidden>
\\

===Woche 3: Klassen===

<hidden Haupt-Sketch>
<code java>
Robot robot1; // large robot
Robot robot2; // small robot

void setup() {
  size(600, 400);
  robot1 = new Robot(300, 200, PI/4, 50); 
  robot2 = new Robot(500, 200, PI, 20);
}

void draw() {
  background(200);
  robot1.show();
  robot2.show();
  robot1.move(4);
  robot1.turn(0.05);
  robot2.move(2);
  float distance = robot1.calculateDistance(robot2);
  if (distance <= 0) { 
  // dies ist anders als im Vorlesungs-Video, weil die Radienlängen in der Methode calculateDistance() abgezogen werden
    robot1.turn(PI);
    robot2.turn(PI);
  }
}
</code>
</hidden>
<hidden Klasse Robot>
<code java>
class Robot {

  // 1. Attribute
  float posX; // x coordinate of the circle center
  float posY; // y coordinate of the circle center
  float angle; // current direction of the robot
  int radius; // radius of the robot


  // 2. Konstruktor, x: x coordinate of the center, y: y coordinate of the center, direction: where the roboter is looking towards, size: radius of the robot
  Robot(float posX, float posY, float direction, int size) {
    this.posX = posX;
    this.posY = posY;
    this.angle = direction;
    this.radius = size;
  }

  // 3. Methoden
  // Turns the robot by the given angle value
  void turn(float angleDiff) {
    this.angle = this.angle + angleDiff;
  }

  // Moves the robot forward by the given distance
  void move(float distance) {
    posX = posX + distance * cos(angle);
    posY = posY + distance * sin(angle);
  }

  // Draws the robot
  void show() {
    circle(posX, posY, radius*2); 
    line(posX, posY, posX + radius * cos(angle), posY + radius * sin(angle));
  }

  // Calculates distance from this robot to the other
  float calculateDistance(Robot other) {
    float deltaX = this.posX - other.posX;
    float deltaY = this.posY - other.posY;
    float distance = sqrt(deltaX*deltaX + deltaY*deltaY);
    return distance - this.radius - other.radius; // dies ist anders als im Vorlesungs-Video
  }
}
</code>
</hidden>
\\

===Woche 4: Bibliotheken===
{{anchor:woche4}}

<hidden Video-Bibliothek: Abzug des Hintergrunds>
<code java>
/**
 * Background Subtraction 
 * by Golan Levin. 
 *
 * Detect the presence of people and objects in the frame using a simple
 * background-subtraction technique. To initialize the background, press a key.
 */


import processing.video.*;

int numPixels;
int[] backgroundPixels;
Capture video;

void setup() {
  size(640, 480); 
  
  // This the default video input, see the GettingStartedCapture 
  // example if it creates an error
  //video = new Capture(this, 160, 120);
  String[] cameras = Capture.list();
  video = new Capture(this, cameras[0]);
  
  // Start capturing the images from the camera
  video.start();  
  
  numPixels = video.width * video.height;
  // Create array to store the background image
  backgroundPixels = new int[numPixels];
  // Make the pixels[] array available for direct manipulation
  loadPixels();
}

void draw() {
  if (video.available()) {
    video.read(); // Read a new video frame
    video.loadPixels(); // Make the pixels of video available
    // Difference between the current frame and the stored background
    int presenceSum = 0;
    for (int i = 0; i < numPixels; i++) { // For each pixel in the video frame...
      // Fetch the current color in that location, and also the color
      // of the background in that spot
      color currColor = video.pixels[i];
      color bkgdColor = backgroundPixels[i];
      // Extract the red, green, and blue components of the current pixel's color
      int currR = (currColor >> 16) & 0xFF;
      int currG = (currColor >> 8) & 0xFF;
      int currB = currColor & 0xFF;
      // Extract the red, green, and blue components of the background pixel's color
      int bkgdR = (bkgdColor >> 16) & 0xFF;
      int bkgdG = (bkgdColor >> 8) & 0xFF;
      int bkgdB = bkgdColor & 0xFF;
      // Compute the difference of the red, green, and blue values
      int diffR = abs(currR - bkgdR);
      int diffG = abs(currG - bkgdG);
      int diffB = abs(currB - bkgdB);
      // Add these differences to the running tally
      presenceSum += diffR + diffG + diffB;
      // Render the difference image to the screen
      pixels[i] = color(diffR, diffG, diffB);
      // The following line does the same thing much faster, but is more technical
      //pixels[i] = 0xFF000000 | (diffR << 16) | (diffG << 8) | diffB;
    }
    updatePixels(); // Notify that the pixels[] array has changed
    println(presenceSum); // Print out the total amount of movement
  }
}

// When a key is pressed, capture the background image into the backgroundPixels
// buffer, by copying each of the current frame's pixels into it.
void keyPressed() {
  video.loadPixels();
  arraycopy(video.pixels, backgroundPixels);
}
</code>
</hidden>

<hidden OpenCV: Gesichtserkennung>
<code java>
import gab.opencv.*;
import java.awt.Rectangle;
import processing.video.*;

OpenCV opencv;
Rectangle[] faces;
Capture video;

void setup() {
  size(640, 480);
  video = new Capture(this, Capture.list()[0]);
  opencv = new OpenCV(this, width, height);
  opencv.loadCascade(OpenCV.CASCADE_FRONTALFACE);  
  
  video.start();
}

void draw() {
  video.read();
  opencv.loadImage(video);
  
  image(video, 0, 0); // display a video frame on the drawing canvas

  noFill();
  stroke(0, 255, 0);
  strokeWeight(3);
  Rectangle[] faces = opencv.detect();
  for (int i = 0; i < faces.length; i++) {
    rect(faces[i].x, faces[i].y, faces[i].width, faces[i].height);
  }
}
</code>
</hidden>

<hidden Bildverarbeitung: Kantendetektion>
<code java>
import gab.opencv.*;
import processing.video.*;

OpenCV opencv;
Capture video;

void setup() {
  
  size(640, 480);
  video = new Capture(this, Capture.list()[0]);
  opencv = new OpenCV(this, width, height);
  video.start();

}

void draw() {
  video.read(); // read current video frame 
  opencv.loadImage(video); // and load it into the opencv object
  opencv.findCannyEdges(20, 75); // find edges
  PImage canny = opencv.getSnapshot(); // get the black-and-white resulting image
  image(canny, 0, 0); // display the image on the drawing canvas
}
</java>
</hidden>

<hidden Bildverarbeitung: Hough-Transformation>
<code java>
import gab.opencv.*;
import processing.video.*;

OpenCV opencv;
Capture video;

void setup() {

  size(640, 480);
  video = new Capture(this, Capture.list()[0]);
  opencv = new OpenCV(this, width, height);
  video.start();
}

void draw() {
  video.read(); // read current video frame 
  opencv.loadImage(video); // and load it into the opencv object
  opencv.findCannyEdges(20, 75); // find edges
  opencv.getSnapshot(); // get the black-and-white resulting image
  image(video, 0, 0); // display the video frame on the drawing canvas

  // Find lines with Hough line detection
  // Arguments are: threshold, minLength, maxLineGap
  ArrayList<Line> lines = opencv.findLines(100, 30, 20);

  for (Line line : lines) {
    // lines include angle in radians, measured in double precision
    // so we can select out vertical and horizontal lines
    // They also include "start" and "end" PVectors with the position
    if (line.angle >= radians(0) && line.angle < radians(1)) {
      stroke(0, 255, 0);
      line(line.start.x, line.start.y, line.end.x, line.end.y);
    }

    if (line.angle > radians(89) && line.angle < radians(91)) {
      stroke(255, 0, 0);
      line(line.start.x, line.start.y, line.end.x, line.end.y);
    }
  }
}
</code>
</hidden>
Projektlabor Robotik MINTgrün

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge
